Although the faucet is a small part, its function is very important. The bathroom pipelines are complicated to lay and there are hot and cold water. Therefore, its installation and placement also have many special features.

Generally, the shower head and faucet are installed together. The faucet is 70-80 cm from the ground, the height of the shower column is 1.1 meters, and the length of the joint between the faucet and the shower column is 10-20 cm. .1-2.2 meters, consumers must fully consider the size of the bathroom space when buying. The shower faucet can be installed on the wall or in the wall, exposing only the handle, or mounted on the bathtub.

Do not install the hot and cold water supply pipes upside down. Under normal circumstances, the hot water supply pipe is on the left and the cold water supply pipe on the right. Except for special signs. After the installation is completed, remove the easily clogged accessories such as the bubbler and shower, let the water flow out, completely remove the impurities, and then reinstall it. The tools provided with the faucet should be retained for future maintenance. When disassembling the water inlet hose, do not wrap the sealing tape, do not use a wrench, and tighten it directly by hand, otherwise the hose will be damaged. The wall-mounted faucet determines the length of the elbow exposed as required, otherwise the elbow exposes the wall too much and affects the appearance.

For thermostatic faucets, the static pressure of hot and cold water supply is recommended to be 3 bar (0.3 MPa), and the minimum water supply pressure is 0.5 bar (0.05 MPa). The pressure difference between hot and cold water supply is not more than 2bar (0.2MPa). If the water supply pressure is more than 5bar (0.5MPa), please install a pressure reducing valve. For thermostats, the hot water supply temperature range is 50 ° C-80 ° C, and the recommended hot water supply temperature is 65 ° C.