Shower system_Kitchen faucet_Bathroom faucet-KaiPing AIDA Sanitary Ware Technology Co.,LTD Location:Home » News » Knowledge
Knowledge
How to install the faucet?
Addtime: 2020-03-19
Clicks:780


10.jpg


1. Before installing the faucet, you need to flush the water, wash the impurities in the water pipe, remove the debris in the installation hole, and check that the accessories in the packaging box do not enter the impurities, so as not to block or wear the ceramic valve core.


2. Use metal hoses to connect water pipes, no need to consider the installation position of water pipes. Put the faucet hose into the faucet installation port and tighten it by hand. Try pulling it to see if it is firmly connected. Then attach other fixtures that need to be assembled before fixing to the faucet.


3. Then pass the assembled faucet hose through the basin, connect the fixing parts, and then fasten them with screws. Pay attention to debugging during the period to see if the faucet is tightly connected to the basin and whether it is loose.


4. After fixing the faucet and the basin, place the basin in a fixed position, and then connect the other end of the hose to the inlet of the water pipe. When taking over, if you divide hot and cold water, remember that the left side is hot water and the right side is cold water. This completes the installation.


Copyright ©   

Technical support: